EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Charge Controller is actually a highly efficient photo voltaic controller suitable for off-grid photo voltaic techniques. Based upon multiphase synchronous rectification know-how, it guarantees optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Key Functions on the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for excellent photo voltaic Electricity harvesting. Key functions consist of:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% efficiency.
Twin-Phase Charging for Improved battery lifetime.
Liquid crystal display Exhibit with serious-time data checking.
Numerous Load Handle Modes like guide and timer.
Extensive Electronic Protections in opposition to overcharging, in excess of-discharging, shorter circuits, and reverse polarity.
Step-by-Action Guide to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Planning the Controller
Assure all components are incorporated: Tracer AN unit, temperature sensor, communication cables, and consumer guide.
Verify the product variety and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a very well-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Preserve proper clearance for warmth dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Often follow suitable safety protocols and make sure the technique is powered off before connecting factors.
Action 1: Connect the battery terminals on the demand controller (constructive to positive, destructive to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power around the controller by connecting the battery first.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports authentic-time checking utilizing the MT50 remote meter.
Data is usually logged by means of the RS485 conversation port making use of computer software which include Solar Station Personal computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Situation 1: No Electrical power Output
Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Defense
Verify the solar array’s voltage ranking.
Modify process parameters if necessary.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies assures:
Higher Efficiency: Diminished Electrical power Read more losses throughout conversion.
Improved Dependability: Steady effectiveness less than variable hundreds.
Longer Battery Lifestyle: Constant and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology is surely an Extraordinary option for optimizing solar energy era and lengthening battery everyday living. By following the above set up guideline, users can make sure highest effectiveness and technique longevity.